Ultra-thin spool that
thoroughly pursues low
inertia.Take aim at your
own will, as if crawling
on the surface
of the water
The state-of-the-art
Magnum Light Spool III
was born as the third
generation of the
evolution of the
first-generation
Magnum Light Spool and
the second-generation
Magnum Light Spool.
We challenged to make
the spool even thinner,
and achieved lower inertia
than before without
compromising durability.
In addition, the spool
installed on NEW Antares
has a narrow (narrow)
shape with a width
of 19 mm against
an outer diameter
of 34 mm, which reduces
the inertia by about 15%
in comparison with
the second-generation
Magnum Light spool.
Achievement. In addition
to long-distance casting
performance, it has
achieved a lighter start-up
that far exceeds
conventional performance,
an exhilarating cast feel
that extends forever,
and a great improvement
in troubleless
performance. |
|
The ultra-small precision
gears and delicate body
housing realize a gsilkyh
winding feeling that
you have never experienced
before. In comparison
with conventional gears,
the vibration level is less
than half (compared to
our company),
and the number of meshing
teeth has increased,
ensuring strength that
exceeds conventional gears.
Shimano's original gear
system that achieves both
a smooth feel and strength.
The ultra-small precision
gears and delicate body
housing realize a gsilkyh
winding feeling that you
have never experienced
before. In comparison with
conventional gears,
the vibration level is less
than half (compared to our
company), and the number
of meshing teeth has
increased, ensuring
strength that exceeds
conventional gears.
Shimano's original gear
system that achieves
both a smooth feel
and strength. |
|
By inserting O-rings inside
and outside the bearing
and outside diameter
of the bearing, the degree
of close contact with
the shaft and frame
is increased and rattling
is reduced. Silent tune
that eliminates the rotation
loss of the spool and
gives a high quietness
and smooth rotation feeling. |
|
SVS (Infinity)
is a centrifugal brake,
but realizes a brake
adjustment range that
can correspond
to most situations
only by adjusting
the external dial.
If the four brake shoes
are turned on during
casting, no adjustment
of the internal brake
shoes is necessary.
When you need a finer
setting, you can make
fine adjustments with
the internal brake shoe.
(4 brake shoes are
on when shipped.) |